The 5-103167-2: This shrouded 4-wall header accepts any AMPMODU Mod II receptacle or female socket housing with a 0.100-inch pitch and 10-circuit count. The square male pins accept crimp-socket contacts from the AMPMODU line; typical wire gauges range from 22 AWG to 30 AWG depending on the terminal selected.
Board Layout Considerations for the Right-Angle Footprint
The insulation height of 0.400 inches (10.16 mm) above the board sets the z-height clearance for adjacent components or enclosure walls. The 0.100-inch row spacing matches standard prototyping grids; the header footprint occupies a 0.200-inch-wide band across the board edge. No special keep-out is needed beyond the pin holes and a small clearance for the shroud body.