TE Connectivity AMP Connectors AMPMODU Mod II, 5-103414-5, 7-position single-row shrouded header, 2.54mm pitch, through-hole solder termination, gold-plated male pins, 3A rating, UL94 V-0, black thermoplastic housing.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.549\" (13.94mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Tube |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 7 |
| Contact finish - post | Tin |
| Contact length - post | 0.130\" (3.30mm) |
| Overall contact length | 0.589\" (14.96mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 5-103414-5: A 7-position single-row shrouded header from the AMPMODU Mod II series, with a 0.100-inch (2.54mm) pitch that matches standard prototyping and production footprints.
The insulation height is 0.549 inches (13.94mm) — measure the clearance to adjacent components or enclosure lids. The 3A current rating is at the contact level; derate if the ambient exceeds 105°C or if multiple contacts carry full current simultaneously.
Any AMPMODU Mod II receptacle with 7 positions and 2.54mm pitch will mate. The header uses a push-pull fastening type, so no locking latch is required on the receptacle side.
No official replacement is listed. The peer 1394090-1 is a 6-position, 2.85mm pitch, right-angle header with tin contacts — it is not pin-compatible. A board layout change would be required to use it.