Skip to main content
Log in
TE Connectivity AMP Connectors 5-146130-3 — Pin Headers

5-146130-3 TE Connectivity AMP Connectors Header SMD 8POS

MPN5-146130-3
Active

TE Connectivity AMP Connectors AMPMODU Mod II, Header Breakaway, 8 Positions, 2 Row, 0.100" (2.54mm) Pitch, Surface Mount, Solder, Gold Mating Finish, Black LCP Housing, UL94 V-0, 3A, 30VAC, -65°C ~ 125°C

$1.3300Ref. price · indicative, final on quote
RoHSRoHS Compliant
SeriesAMPMODU Mod II
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5-146130-3 key specifications
ParameterValue
SeriesAMPMODU Mod II
TypeMale Pin
MountingSurface Mount
Connector typeHeader, Breakaway
Fastening typePush-Pull
Voltage rating30VAC
Current rating3A
Operating temperature-65°C ~ 125°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.090\" (2.29mm)
Insulation materialLiquid Crystal Polymer (LCP)

All specifications

5-146130-3 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageTube
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions8
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact finish - matingGold
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The 5-146130-3: The gold mating finish (30 µinch over nickel) handles repeated connect-disconnect cycles without the fretting that tin contacts show in low-voltage circuits.

Board layout and SMT termination

Surface-mount solder tails let this header sit flush on the PCB without through-holes, freeing the opposite side for routing. The header mates with any AMPMODU Mod II receptacle on the same 0.100" grid—unshrouded, so the board edge or a mating housing provides the alignment.

Peer comparison: shrouded vs unshrouded

That part trades position count and gold plating for a locking shroud and board retention; the 5-146130-3 gives you 8 positions, gold contacts, and SMT termination for a lower-profile board-to-board or cable interconnect.

Frequently asked questions

What is the exact pitch of 5-146130-3?

The mating pitch is 0.100" (2.54 mm) between centres, with the same 0.100" row spacing. This is the standard 0.100" grid, compatible with most prototyping boards and AMPMODU Mod II receptacles.

What is the recommended mating connector for 5-146130-3?

Any AMPMODU Mod II receptacle on 0.100" pitch with 8 positions in a 2-row configuration will mate. Because the header is unshrouded, the receptacle or a separate housing provides the alignment. Confirm the contact finish—gold-to-gold is preferred for repeated mating cycles.