Skip to main content
TE Connectivity AMP Connectors 5-146261-7 — Pin Headers, Sockets & Housings

5-146261-7 TE Connectivity AMPMODU Mod II Breakaway Header

MPN5-146261-7
Active

TE Connectivity AMPMODU Mod II breakaway header, 14 positions, 2 rows, 0.100" (2.54 mm) pitch, unshrouded, through-hole solder termination, gold-plated mating contacts, 3 A rating, UL94 V-0 LCP housing.

$1.8271Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

5-146261-7 key specifications
ParameterValue
SeriesAMPMODU Mod II
TypeMale Pin
MountingThrough Hole
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.090\" (2.29mm)
Insulation materialLiquid Crystal Polymer (LCP)
Material flammability ratingUL94 V-0

All specifications

5-146261-7 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions14
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.090\" (2.29mm)
Overall contact length0.410\" (10.41mm)
Contact finish - matingGold
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The 5-146261-7: Unshrouded design leaves the square pins exposed. This is typical for breakaway headers where the user snaps the pin strip to length.

Current and Contact Life — Signal-Duty Interconnect

This is a signal-level current — suitable for logic, I/O, and low-power board interconnects. At 14 positions fully loaded, the total current budget is 42 A, but derating above 85°C will reduce that per-contact ceiling. 30 µinch gold over nickel on the mating face — a standard industrial plating grade that supports 500+ mating cycles. The gold/tin interface at the mating face is the correct combination for repeated mating without fretting corrosion.

Lifecycle and Sourcing — Active Production, No LTB

No stock-holding claim; the part is sourced per RFQ. The base product number is 146261 — this specific variant (5-146261-7) carries the 14-position, gold-plated, through-hole configuration. Other position counts and plating options exist under the same base number.

Housing and Compliance — UL94 V-0, RoHS

Frequently asked questions

What is the pitch of 5-146261-7?

The mating pitch is 0.100" (2.54 mm) on both the row-to-row and pin-to-pin spacing. This is the standard 0.100-inch grid used in legacy and current PCB layouts.

Is 5-146261-7 shrouded or unshrouded?

Unshrouded — there is no plastic shroud around the pins.

What is the mounting type of 5-146261-7?

Through-hole solder termination. The posts are 0.090" (2.29 mm) long, designed for wave or hand solder into a standard 0.100" grid PCB.