TE Connectivity AMP Connectors AMPMODU Mod IV, 4-position dual-row receptacle, 0.100" (2.54 mm) pitch, through-hole solder termination, tin-plated contacts, 2 A rating, UL94 V-0 black polyester housing.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod IV |
| Type | Female Socket |
| Mounting | Through Hole |
| Connector type | Receptacle |
| Fastening type | Push-Pull |
| Current rating | 2A |
| Operating temperature | -65°C ~ 125°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.320\" (8.13mm) |
| Insulation material | Polyester, Glass Filled |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Tube |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 4 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.125\" (3.18mm) |
| Contact finish - mating | Tin |
| Contact finish thickness - post | 150.0µin (3.81µm) |
| Contact finish thickness - mating | 150.0µin (3.81µm) |
With only 4 positions loaded across two rows, the footprint is small — about 0.200" row spacing and 0.100" between centres — so it fits tight board edges or low-channel-count signal runs. The 0.125" (3.18 mm) post length gives enough standoff for solder fillet inspection on a standard 1.6 mm PCB.
That current ceiling is typical for signal-level circuits — think digital I/O, sensor inputs, or low-power control lines.
The pitch is 0.100" (2.54 mm) on both the mating interface and the row spacing.
Yes, it is RoHS compliant.
It mates with any 0.025" square-pin header on 0.100" pitch, such as TE's AMPMODU Mod IV or BergStik II series headers. Confirm the pin length and stack height for your board-to-board spacing.