The 5-534206-7: The 0.100" row spacing matches the pitch, so the footprint is symmetric and the board layout stays clean. The tin-plated solder tails (150 µinch) wet well through the hole. Operating range from -65°C to 125°C, with a UL94 V-0 glass-filled polyester housing.
No press-fit tooling needed; just wave or hand solder. The insulation height of 0.320" (8.13 mm) sets the z-height above the board — factor this into the enclosure clearance if the mating header sits on a mezzanine card.
Comparison with Peer Alternatives
The closest functional alternative within the same series is 1376775-2 — also a dual-row AMPMODU Mod II receptacle, but with 5 positions and 8 µinch gold on the mating face. That thinner gold layer is fine for low-cycle applications but wears faster if the connector sees regular field servicing.