TE Connectivity AMP-Latch, Board to Cable/Wire, Header, 26 Positions, 2 Rows, 0.100" (2.54mm) Pitch, Through Hole, Solder, Shrouded - 4 Wall, Black, UL94 V-0, 1A per Contact, Gold or Gold-Palladium Mating Finish
| Parameter | Value |
|---|---|
| Series | AMP-Latch |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 1A per Contact |
| Operating temperature | -55°C ~ 105°C |
| Insulation color | Black |
| Insulation height | 0.549\" (13.94mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Parameter | Value |
|---|---|
| Features | Mounting Flange |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 26 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Overall contact length | 0.639\" (16.23mm) |
| Contact finish - mating | Gold or Gold-Palladium |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 5102153-6 is a 26-position, 2-row, 0.100" (2.54mm) pitch header from the TE AMP-Latch series, designed to mate with AMP-Latch IDC cable assemblies for board-to-cable wiring. Rated at 1 A per contact, the header suits low-power signal or logic-level interconnects where the current per circuit stays well below the 1 A ceiling.
Yes, the 5102153-6 is a shrouded 4-wall header from the AMP-Latch series, designed to mate with AMP-Latch IDC cable assemblies. The 0.100" pitch and 2-row, 26-position layout match the standard AMP-Latch receptacle footprint.