TE Connectivity AMP-Latch shrouded header, 26 positions, 0.100" (2.54mm) pitch, dual-row, right-angle through-hole, male pin, gold or gold-palladium mating finish, 1 A per contact, 250 VAC, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | AMP-Latch |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 250VAC |
| Current rating | 1A per Contact |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.315\" (8.00mm) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Keying Slot, Mounting Flange |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 26 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold or Gold-Palladium |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
A keying slot and mounting flange on the housing prevent mis-mating and provide mechanical retention to the PCB. The UL94 V-0 flammability rating confirms the housing material meets the flame-retardance requirement for electronic equipment.
Design engineers need complete electrical and mechanical specs to validate fit in their circuit.
Sourcing buyers need immediate availability and cost to fill BOM lines.
Engineers must confirm PCB layout compatibility before design-in.
Compliance with environmental regulations is mandatory for many end products.
Production planners need to know delivery timelines to avoid line stops.
Maintenance techs and brokers need drop-in alternatives if the exact part is unavailable or obsolete.