Skip to main content
Log in
TE Connectivity AMP Connectors 5103308-3 — Pin Headers

5103308-3 TE AMP-Latch Header 16 Pos 2.54mm Pitch

MPN5103308-3
Active

TE Connectivity AMP-Latch shrouded header, vertical through-hole, 16 circuits, 0.100" (2.54 mm) pitch, gold or gold-palladium mating finish, keying slot, UL94 V-0.

$2.2200Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 5103308-3 datasheet (PDF)
RoHSRoHS Compliant
SeriesAMP-Latch
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5103308-3 key specifications
ParameterValue
SeriesAMP-Latch
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating1A per Contact
Operating temperature-65°C ~ 105°C
Contact materialBrass
Insulation colorBlack
Insulation height0.388\" (9.86mm)
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire

All specifications

5103308-3 additional specifications
ParameterValue
PackageTray
FeaturesKeying Slot
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions16
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Contact finish - matingGold or Gold-Palladium
Contact length - mating0.240\" (6.10mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

16-position 2.54 mm pitch shrouded header for AMP-Latch IDC

The header carries a keying slot, so it only mates with the matching keyed AMP-Latch receptacle. This prevents cross-mating with other 0.100" pitch headers that might share the same board footprint — a simple but effective anti-error feature in a multi-connector panel.

Gold mating finish rated for repeated disconnect cycles

The 0.100" pitch and the contact cross-section set that ceiling; for anything above a few hundred milliamps per line, you should check the temperature rise in your specific board stack-up.

Through-hole termination with 0.120" post length

That z-height budget is fixed; make sure your enclosure clearance and mating-cable bend radius fit within it.

Frequently asked questions

What is the pitch of 5103308-3?

The mating pitch is 0.100" (2.54 mm), with the same 0.100" row spacing. This is the standard AMP-Latch pitch, matching the full range of AMP-Latch IDC receptacles.

Does the 5103308-3 have a keying slot?

Yes, the header includes a keying slot. It mates only with the corresponding keyed AMP-Latch receptacle, preventing accidental connection with non-keyed headers or receptacles on the same board.

Is 5103308-3 compatible with AMP-Latch IDC connectors?

Yes. The 5103308-3 is a shrouded header from the AMP-Latch series, designed to mate with standard AMP-Latch IDC socket connectors. The 16-position, 0.100" pitch, dual-row layout is the direct match for the 16-position AMP-Latch receptacle.