Skip to main content
Log in
TE Connectivity AMP Connectors 5104338-7 — Pin Headers

5104338-7 TE Connectivity AMP-Latch 34-Pin Header 2.54mm

MPN5104338-7
Active

TE Connectivity AMP-Latch 5104338-7, 34-position, 2-row, 0.100" (2.54mm) pitch shrouded header, vertical through-hole, kinked pin solder termination, 1A per contact, 15µin gold mating finish, UL94 V-0.

$7.2300Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 5104338-7 datasheet (PDF)
RoHSRoHS Compliant
SeriesAMP-Latch
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5104338-7 key specifications
ParameterValue
SeriesAMP-Latch
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating1A per Contact
Operating temperature-65°C ~ 105°C
Contact materialBrass
Insulation colorBlack
Insulation height0.385\" (9.78mm)
Insulation materialPolyphthalamide (PPA), Glass Filled
Material flammability ratingUL94 V-0

All specifications

5104338-7 additional specifications
ParameterValue
StyleBoard to Cable/Wire
PackageTube
FeaturesKeying Slot
ShroudingShrouded - 4 Wall
TerminationKinked Pin, Solder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions34
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Contact finish - matingGold or Gold-Palladium
Contact length - mating0.240\" (6.10mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

34-Position AMP-Latch Header for Board-to-Cable Interconnects

The 5104338-7: The 100µinch tin post finish suits standard wave-solder processes.

Sourcing and Compliance for the BOM Line

Supplied in tube packaging — verify the tube quantity against your pick-and-place feeder requirements if automated assembly is planned.

Mates with AMP-Latch IDC socket connectors (e.g., 1-111626-4 or 1-111626-8 series) for 0.050" pitch ribbon cable. Keying slot feature prevents mismating with non-keyed socket housings, reducing assembly errors on the harness line.

Frequently asked questions

What is the pitch of 5104338-7?

The mating pitch is 0.100" (2.54mm) between contacts and between rows, standard for AMP-Latch IDC headers.

Is 5104338-7 a shrouded header?

Yes, it is a shrouded - 4 wall header, meaning the male pins are fully enclosed by the housing for protection and alignment during mating.