Skip to main content
Log in
5228980-5 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

TE 5228980-5 BNC Jack, 50 Ohm, 4 GHz, Bulkhead Kit

MPN5228980-5
Obsolete

TE Connectivity 5228980-5 BNC jack, female socket, 50 Ohm, 4 GHz, panel mount bulkhead, crimp termination, nickel-plated zinc body, gold-plated beryllium copper centre contact, includes 6-piece kit.

$0.8400Ref. price · indicative, final on quote
5228980-5 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

5228980-5 Technical Specifications
ParameterValue
Mounting typePanel Mount
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Mounting featureBulkhead - Front Side Nut
Cable groupRG-58, 58A, 58B, 58C, 141, 141A
Operating temperature-55°C ~ 85°C
Body materialZinc
Housing colorSilver
Dielectric materialPolypropylene (PP)
Center contact materialBeryllium Copper
PackageBulk
Includes6 pcs - 1 Connector, 1 Contact, 1 Ferrule, 1 Gasket, 1 Lockwasher, 1 Nut
Impedance50 Ohms
Body finishNickel
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

BNC Bulkhead Jack Kit for RG-58 and RG-141 Cables

The 5228980-5: This is a complete installation kit — the package includes the connector body, a crimp contact, a ferrule, a panel gasket, a lockwasher, and a hex nut, all in one bulk pack.

RF Specs and Cable Fit

The dielectric is polypropylene. The shield and centre contact both terminate by crimp.

What's in the Kit and How It Mounts

The kit includes six pieces: the BNC jack body with a crimp ferrule pre-installed on the shield tail, a separate centre contact, a panel gasket, a lockwasher, and a hex nut. Mounting is bulkhead-style with the front-side nut — the gasket seals the panel cutout, the lockwasher prevents the nut from backing off under vibration, and the nut torques down from the front of the panel.

Frequently asked questions

Does 5228980-5 work with RG-58 cable?

Yes, the 5228980-5 is designed for RG-58, RG-58A, RG-58B, RG-58C, RG-141, and RG-141A cables.