What This 2-Pin Receptacle Does in a Board-to-Board or Cable Assembly
The 534206-1: With a 2 A current rating per contact and a 30 µinch gold mating finish, this part handles moderate-duty signal circuits where repeated mating and environmental exposure matter. The gold over phosphor bronze contact wipes clean on insertion and resists oxidation better than tin in non-sealed enclosures.
Board Fit and Routing — 0.100-Inch Row Spacing
The through-hole termination with a 0.115-inch (2.92 mm) post length gives enough standoff for solder fillet inspection on a standard 0.062-inch board. The 2-position, 2-row layout means the two contacts sit diagonally opposite — the board footprint is a 2×2 grid with one position unloaded.
Lifecycle and Sourcing — Active Production, No Replacement Needed
The part is ROHS3 compliant, with tin-lead post finish — confirm your assembly's lead-free exemption if applicable. No official replacement or cross-reference exists — the 534206-1 is the current production part for this 2-position, 0.100-inch pitch configuration.