What this 6-position receptacle fits
The gold-plated mating contacts (30.0µin gold over nickel) handle 2A per circuit, with a phosphor bronze spring beam that keeps contact force consistent over repeated mates. For a board-to-board or cable application where the connector sits inside an enclosure and sees minimal vibration, this is a clean, low-profile solution.
Mating and termination — what to pair it with
This receptacle mates with standard 0.025" square pin headers on 0.100" pitch. The through-hole solder tails (0.115" post length) sit in plated-through holes on the PCB. The black glass-filled polyester housing (UL94 V-0 rated) withstands wave-solder temperatures without distortion.
How it compares to nearby siblings
The thicker gold on the 534237-4 supports more mating cycles — roughly 500 cycles versus ~200 for the thinner flash. If you need 6 positions, the 534237-4 is the direct pick; 1376775-2 covers 5-position BOMs at a lower contact cost.