14-Pin Shrouded Header for Wire-to-Board Harnesses
The 5499160-2: Rated at 1A per contact, the current ceiling is conservative for the 2.54mm pitch; the limiting factor here is the contact temperature rise within the UL94 V-0 housing, not the pin cross-section.
Locking and Keying for Vibration Resistance
The header uses latch lock/eject hooks (short version) on the shroud — these snap into the mating receptacle's slots and hold the pair mated under vibration. A keying slot and mounting flange prevent mis-mating and provide a secondary board-retention anchor during soldering.
RoHS compliant per current regulations.