Skip to main content
Log in
TE Connectivity AMP Connectors 5499374-9 — Pin Headers

5499374-9 TE AMP-Latch 40 Pos Header 2.54mm Pitch

MPN5499374-9
Active

TE Connectivity AMP-Latch series, 40-position, 2-row, 0.100" (2.54mm) pitch, shrouded header, through-hole solder termination, male pin, square contact, black insulation, latch lock/eject hooks, 1A per contact, 250VAC, -65°C ~ 105°C, UL94 V-0, tray

$10.9400Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 5499374-9 datasheet (PDF)
RoHSRoHS Compliant
SeriesAMP-Latch
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5499374-9 key specifications
ParameterValue
SeriesAMP-Latch
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Lock/Eject Hooks, Short
Voltage rating250VAC
Current rating1A per Contact
Operating temperature-65°C ~ 105°C
Insulation colorBlack
Insulation height0.549\" (13.94mm)
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire

All specifications

5499374-9 additional specifications
ParameterValue
PackageTray
FeaturesKeying Slot, Mounting Flange
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions40
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.155\" (3.94mm)
Overall contact length0.684\" (17.37mm)
Contact finish - matingGold or Gold-Palladium
Contact length - mating0.240\" (6.10mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

40-Position Shrouded Header for Parallel Cable

The 5499374-9: This is a 40-position, dual-row header on 0.100" (2.54mm) pitch — the standard footprint for AMP-Latch ribbon cable receptacles. Rated 1A per contact at 250VAC, with a gold or gold-palladium mating finish plated to 30.0µin (0.76µm) thickness — enough for repeated disconnect cycles in field-service or test equipment.

Latch Lock and Keying for Vibration Environments

A keying slot and mounting flange add alignment and panel-securing options. The 0.549" (13.94mm) insulation height leaves room for the eject hooks to clear the board surface, and the 0.240" (6.10mm) mating pin length ensures full contact wipe inside the receptacle.

Frequently asked questions

Does 5499374-9 mate with AMP-Latch 40-position ribbon cable connectors?

Yes — the 0.100" (2.54mm) pitch, 40-position layout, and latch lock/eject hooks are designed for AMP-Latch IDC receptacles and ribbon cable assemblies.