24-Position Right-Angle Header for Board-to-Cable Signal Routing
The right-angle orientation and 0.110" (2.79mm) post length are key for board-edge placement: the connector sits flush against the PCB edge, and the cable routes flat, saving vertical clearance inside the enclosure.
Shrouded Housing with Latch Lock and Keying Slot
A 4-wall shroud surrounds the male pins, protecting them from damage during handling and preventing accidental shorting against adjacent components. The mounting flange adds mechanical stability, transferring cable strain to the board through the flange rather than the solder joints.
Active Production and RoHS Compliance
Sourced through independent distribution channels.