SL-156 Receptacle Housing for Harness Builds
The 0.156" (3.96mm) pitch is the standard spacing for this series, giving enough room between circuits for 18-24 AWG wire without crowding the crimp terminals.
For a 9-circuit harness, you need 9 individual crimp contacts plus the housing. The SL-156 series uses standard TE crimp terminals; confirm the wire gauge range (typically 18-24 AWG for this series) matches your harness build before committing the BOM.
Mating Header and Panel Fit
The 640251-9 mates with the matching SL-156 series PCB headers at the same 0.156" (3.96mm) pitch. The 9-position count matches a 9-pin header; verify the header's keying and latch orientation align with your harness routing before ordering production quantities.
