Obsolete — No Direct Successor on Record
The 647116-2 is officially obsolete per TE Connectivity's lifecycle status. No pin-compatible successor is listed by the manufacturer, so a board spin or alternative sourcing is required for new builds.
0.100" Pitch, 2-Position Shrouded Header with Friction Lock
The shrouded one-wall design and friction lock keep the mating receptacle seated under moderate vibration, reducing the chance of intermittent contact in field equipment. The header accepts male pin contacts with a square cross-section, soldered into a through-hole PCB. The gold mating finish at 30 µinch thickness provides a corrosion-resistant interface for repeated mating cycles, typical for field-serviceable harnesses.
Sourcing the 647116-2 Through Independent Channels
As an obsolete part, the 647116-2 is not available from TE Connectivity's standard distribution.