Skip to main content
TE Connectivity AMP Connectors 7-2232044-7 — Pin Headers, Sockets & Housings

TE 7-2232044-7 Header, 7-Pos 5.00mm, 20A, Silver

MPN7-2232044-7
Active

TE Connectivity AMP Connectors header, order code 7-2232044-7, 7 positions, single row, 5.00 mm pitch, 20 A, 250 VAC, silver-plated mating contacts, through-hole, solder termination.

$1.5137Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

7-2232044-7 key specifications
ParameterValue
TypeTab
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Holder
Voltage rating250VAC
Current rating20A
Operating temperature-40°C ~ 120°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.504\" (12.80mm)
Insulation materialPolyamide (PA), Nylon
Material flammability ratingUL94 V-0

All specifications

7-2232044-7 additional specifications
ParameterValue
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide, Glow Wire Compliant
ShroudingShrouded - 4 Wall
TerminationSolder
ApplicationsGeneral Purpose
Contact shapeRectangular
Rows1
Pitch0.197\" (5.00mm)
Positions7
Contact finish - postSilver
Contact length - post0.138\" (3.50mm)
Contact finish - matingSilver

Product details

Single-row 5.00 mm pitch, 7 circuits

The 7-2232044-7 is a 7-circuit, single-row board-to-wire header from TE Connectivity AMP Connectors, pitched at 5.00 mm — wide enough to route 20 A per contact without crowding the board. Silver-plated mating contacts carry the 250 VAC rating; the PA66 housing holds UL94 V-0 and glow-wire compliance, with a -40 °C to 120 °C operating range.

Glow-wire and latch-holder for appliance duty

The 4-wall shroud and latch-holder fastening protect the tab contacts from mis-mate and vibration — the latch clicks into the matching receptacle and stays there. Board guide on the housing aligns the header during wave-solder placement. Glow-wire compliance and UL94 V-0 polyamide make this header a candidate for white-goods and appliance power interconnects where the standard 20 A rating and 5.00 mm pitch match the circuit load.

Frequently asked questions

What replaces 7-2232044-7 if it goes obsolete?

No official successor or cross-reference is listed for this order code. Confirm alternative sourcing through the full TE Industrial Power connector family or submit an RFQ to check availability.

What is the pitch and position count of 7-2232044-7?

5.00 mm pitch, 7 positions in a single row — all 7 positions are loaded.

What does 7-2232044-7 mate with?

It mates with the matching latch-holder receptacle housing in the same TE Industrial connector series — confirm the receptacle order code before specifying the full harness assembly.

What certifications does this header carry?

The housing is rated UL94 V-0; glow wire compliance is listed. Full RoHS/REACH status and any applicable industrial safety certifications should be confirmed against the TE product datasheet before design lock.