Panel-Mount Receptacle Housing for the Commercial .062" Series
It uses a 0.145" (3.68 mm) centerline pitch and accepts either male or female crimp contacts, letting you build a wire-to-wire or wire-to-panel interconnect with the same shell.
The locking ramp on this housing provides a tactile and audible click when mated — a field-service technician can confirm full engagement without a pull test. The panel mount is snap-in, meaning no separate mounting hardware is required; the housing snaps into a rectangular cutout and is retained by integral barbs. For a harness builder, this simplifies field replacement: the housing can be popped out of the panel and a new one snapped in without tools, provided the crimp terminals are transferred correctly. The single-row, 3-position layout keeps the connector narrow, which helps when routing multiple wires through a tight enclosure gland.