Receptacle Housing — 2-Position, 0.145" Pitch
The 0.145" (3.68mm) pitch gives the contacts enough spacing for the rated voltage creepage without crowding the harness — wider than the typical 0.100" header pitch, so the crimp tool nests between cavities without interference. Natural colour, bulk packaged. The base product number is 770342.
The Commercial.062" Pin and Socket series uses a standard 0.062" diameter pin and socket terminal; the exact part number depends on wire gauge (typically 18-24 AWG) and plating requirement (tin for standard duty, gold for higher mating-cycle applications). Each cavity requires one terminal, so a 2-position build needs two contacts plus the housing. Factor the terminal order into the BOM line — the housing without contacts is just a shell. Crimp termination means the housing is field-serviceable: terminals can be extracted with the correct removal tool and replaced without desoldering.