Housing-Only Connector for Harness Builds
The latch lock provides audible positive retention when mated — no secondary locking mechanism required for most vibration profiles. This is a housing-only part — contacts are ordered separately. The 4.14 mm row spacing leaves room for larger wire gauges without the cavities crowding each other.
Typical contact part numbers include the 1-794617-0 series for pin contacts and 1-794606-0 series for socket contacts — always verify the specific wire gauge range and plating grade (tin vs. gold) against your application current and cycle-life requirements. Crimp termination means the contacts are applied with a standard crimp tool. The housing has no PCB tails — it's strictly for wire harness assembly.
The housing is packaged in bulk, which suits manual assembly lines and low-to-medium volume harness builds. For automated placement, the housing is designed for hand-loading into fixtures rather than tape-and-reel feed.