14-position dual-row receptacle for board-to-board or cable harness
Termination is through-hole with kinked pins, which provide a press-fit retention in the PCB hole before soldering — helpful for wave-solder assembly where the part must stay seated during handling. The contact length after the board is 0.122 inches (3.10mm), a standard length for 1.6mm-thick PCBs. The insulation height of 0.157 inches (4.00mm) gives clearance under the receptacle for routing traces or placing components on the opposite side.
The key difference for a BOM fit: 8-215079-4 has 14 positions versus 12, and uses through-hole kinked pins instead of SMT. If your board layout requires SMT and you can drop to 12 circuits, the 1-2823056-2 is a direct alternative; otherwise this through-hole part is the one.