TE Connectivity AMPMODU Mod II, Header, Breakaway, 8 Positions, 0.100" (2.54mm) Pitch, Through Hole, Right Angle, Gold Mating Finish, 5A
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 5A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Green |
| Insulation height | 0.100\" (2.54mm) |
| Insulation material | Polybutylene Terephthalate (PBT) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 8 |
| Contact finish - post | Tin |
| Contact length - post | 0.126\" (3.20mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.264\" (6.70mm) |
| Contact finish thickness - post | 98.4µin (2.50µm) |
| Contact finish thickness - mating | 3.90µin (0.099µm) |
The 825437-8: The gold layer is enough for repeated mating in a controlled environment; the tin-plated solder tails (98.4 µinch) handle the board-side connection.
The post length after soldering is 0.126" (3.20 mm), fitting a typical 1.6 mm PCB.
The AMPMODU Mod II series includes many position counts and orientations, but a direct pin-compatible swap would need the same pitch, row count, and mounting style.
Yes, it is unshrouded with 8 positions in a single row, all positions loaded.