TE Connectivity AMP Connectors AMPMODU Mod II, 826926-4, Header, Breakaway, 4 Positions, 0.100" (2.54mm) Pitch, Through Hole, Unshrouded, Tin Mating Finish, 5A, UL94 V-0, Bulk
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 5A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Green |
| Insulation height | 0.110\" (2.79mm) |
| Insulation material | Polybutylene Terephthalate (PBT) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 4 |
| Contact finish - post | Tin |
| Contact length - post | 0.126\" (3.20mm) |
| Overall contact length | 0.500\" (12.70mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.264\" (6.70mm) |
| Contact finish thickness - post | 78.7µin (2.00µm) |
| Contact finish thickness - mating | 78.7µin (2.00µm) |
826926-4 is a 4-position, single-row, unshrouded pin header from the AMPMODU Mod II series, on 0.100" (2.54mm) pitch. It's a breakaway style — you can snap it to length if needed, though this one ships as a fixed 4-position piece.
The 4-position single-row layout takes up minimal board edge — about 0.4" (10.16mm) of PCB real estate. Through-hole mounting gives a solid mechanical anchor for cable assemblies or low-cycle board stacking.
826926-4 is a 4-position single-row header. The pinout is a linear 1x4 arrangement on 0.100" (2.54mm) pitch. All positions are loaded. There is no keying or polarization — the unshrouded design allows mating in either orientation, so ensure the mating receptacle is correctly aligned.