TE Connectivity AMP Connectors AMPMODU Mod II, Header, Breakaway, 3 Positions, 0.100" (2.54mm) Pitch, Through Hole, Tin Mating and Post Finish, 5A, UL94 V-0
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 5A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Green |
| Insulation height | 0.110\" (2.79mm) |
| Insulation material | Polybutylene Terephthalate (PBT) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 3 |
| Contact finish - post | Tin |
| Contact length - post | 0.126\" (3.20mm) |
| Overall contact length | 0.465\" (11.81mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.228\" (5.80mm) |
| Contact finish thickness - post | 78.7µin (2.00µm) |
| Contact finish thickness - mating | 78.7µin (2.00µm) |
The 826936-3: Tin-plated contacts are best suited for applications with fewer than 50 mating cycles — the tin surface can frett under vibration or repeated insertion, but for a header that gets mated once and stays put (e.g., a board-to-wire harness in a control panel), it is a cost-effective choice. The 5A rating per contact is the maximum at 25°C; derate above that ambient per the series guidelines.
Sourcing buyers need immediate stock confirmation for BOM fulfillment.
Price influences budget decisions and distributor selection.
Lifecycle status determines long-term availability and replacement planning.
Engineers cross-check alternatives for design flexibility or supply risk mitigation.
Design engineers need mating part numbers for complete interconnect solution.
Validation of fit into PCB layout avoids redesign delays.