0.100" pitch, 10 positions, dual-row — footprint match first
Right-angle orientation — board-edge routing and z-height
This is the typical choice for board-edge headers where a cable or mating connector runs along the board rather than standing above it. The mating pin length is 0.318" (8.08mm) and the post length is 0.110" (2.79mm) — the post is short enough for single-sided boards but check the solder fillet clearance on thicker multilayer boards. Insulation height is 0.238" (6.05mm) — the body sits low enough to keep the mated connector within a standard 0.5U card slot envelope when the mating half is a low-profile socket.
Sourced through independent distribution against a BOM quantity. The base product number is 87230, which covers the family of AMPMODU Mod II headers with this footprint.
Board-to-board or cable — style and mating half
The 3A current rating is per contact with all positions powered; derate above 85°C ambient per the standard AMPMODU derating curve.