Skip to main content
Log in
87232-2 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

87232-2 TE Connectivity AMP Connectors Pin Header, 2 Pos

MPN87232-2
Active

TE Connectivity AMP Connectors AMPMODU Mod II, Header, 2 Positions, 0.100" (2.54mm) Pitch, Through Hole, Right Angle, Solder Termination, Gold Mating Contact, 3A, UL94 V-0, Black Insulation.

$1.7500Ref. price · indicative, final on quote
87232-2 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87232-2 Technical Specifications
ParameterValue
SeriesAMPMODU Mod II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C ~ 105°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.138\" (3.50mm)
Insulation materialPolyamide (PA), Nylon, Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions2
Contact finish - postGold
Contact length - post0.110\" (2.79mm)
Contact finish - matingGold
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - postFlash
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The 87232-2: The 0.110-inch (2.79 mm) solder tail length suits typical 1.6 mm thick PCBs — the pin protrudes through the board for a reliable solder fillet. Mating connectors include any AMPMODU Mod II receptacle or female header on 0.100-inch pitch with 2 positions. For vibration-prone environments, a shrouded header or a locking latch on the receptacle side is recommended.

The 87232-2 is the base product number for this 2-position variant; other position counts in the same series share the same pitch and plating but differ in circuit count.

Frequently asked questions

What is the mating connector for 87232-2?

The unshrouded pins require the mating half to provide its own alignment — a shrouded header or keyed receptacle is recommended for vibration resistance.

What is the pin spacing of 87232-2?

The pitch is 0.100 inches (2.54 mm), standard for the AMPMODU Mod II series and compatible with 0.100-inch grid boards and IDC connectors.