TE Connectivity AMP Connectors AMPMODU Mod II, 6 Position, 0.100" (2.54mm) Pitch, Unshrouded Header, Through Hole, Right Angle, Gold Mating Finish, 3A, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.138\" (3.50mm) |
| Insulation material | Polyamide (PA), Nylon, Glass Filled |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 6 |
| Contact finish - post | Gold |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - post | Flash |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 87232-6: RoHS compliant. The part ships in bulk packaging — no tape-and-reel, so plan for manual or tube-fed placement if using automated assembly.
The male pin length is 0.318" (8.08 mm) on the mating side, which engages with a standard receptacle contact depth of about 0.250". The post length on the solder tail is 0.110" (2.79 mm), suitable for standard 0.062-inch thick PCBs.
No, it is unshrouded. This is typical for low-cost, high-density board-to-board or cable-to-board interconnects where the mating housing has a built-in latch.