Skip to main content
Log in
87232-8 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

87232-8 TE Connectivity AMPMODU Mod II Header, 8 Pos

MPN87232-8
Active

TE Connectivity AMPMODU Mod II, 87232-8, unshrouded header, 8 positions, 0.100" (2.54 mm) pitch, male pin, through hole right angle, gold mating finish, 3 A, UL94 V-0.

$5.0400Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87232-8 Technical Specifications
ParameterValue
SeriesAMPMODU Mod II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C ~ 105°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.138\" (3.50mm)
Insulation materialPolyamide (PA), Nylon, Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions8
Contact finish - postGold
Contact length - post0.110\" (2.79mm)
Contact finish - matingGold
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - postFlash
Contact finish thickness - mating30.0µin (0.76µm)

Product details

0.100-inch pitch, 8-position unshrouded header

The 87232-8 is an 8-circuit, single-row header from TE's AMPMODU Mod II series.

No stock-holding claim; sourced through independent distribution per RFQ.

Mates with AMPMODU Mod II receptacles

This header mates with standard AMPMODU Mod II receptacle housings and crimp-socket terminals. The 0.100" pitch and square 0.025" pin cross-section are the system interface — confirm the mating half part number against your harness assembly before ordering. The push-pull fastening and unshrouded design mean no secondary latch; the retention relies on the interference fit of the receptacle contacts. In high-vibration environments, consider a shrouded header or a secondary locking mechanism.

Gold flash on solder tails, 30 µinch on mating

The flash coating on the tail is sufficient for solderability; the thicker gold on the mating face provides the cycle life.

Frequently asked questions

How can I order the TE Connectivity 87232-8 header and check current availability?

The 87232-8 is an active part. Submit an RFQ with your target quantity and delivery window; pricing and lead time are confirmed at quote time. No on-hand stock is claimed — sourced per order.

Is the 87232-8 header compatible with AMPMODU Mod II receptacles?

Yes, the 87232-8 mates with standard AMPMODU Mod II receptacle housings. The 0.100" pitch and square pin profile are the system interface. Confirm the receptacle part number against your harness assembly before committing the BOM.