TE Connectivity AMPMODU Mod II unshrouded header, 3 positions, 0.100" (2.54 mm) pitch, right-angle through-hole, gold-plated male pins, 3 A rating, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.138\" (3.50mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 3 |
| Contact finish - post | Gold |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - post | Flash |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
In a field-service tap that gets cycled quarterly, that gold layer buys decades of reliable connection at the interface.
No pin-compatible direct replacement from TE within the same series has been flagged; if you need a different position count or plating, the 87233 base number is the starting point.
Any standard 0.100-inch pitch, 3-position receptacle — typically AMPMODU Mod II socket housings or equivalent unshrouded female connectors with 0.025-inch square pin receptacles. The push-pull retention means the mating pair relies on contact friction; no locking latch is present.