TE Connectivity AMPMODU Mod I, Board to Board or Cable, Header, Male Pin, 4 Positions, 0.156" (3.96mm) Pitch, Through Hole, Solder, Gold Mating Finish, 5A per Contact, -65°C ~ 105°C, UL94 V-2
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod I |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 5A per Contact |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.125\" (3.18mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-2 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Rectangular |
| Rows | 1 |
| Pitch | 0.156\" (3.96mm) |
| Positions | 4 |
| Contact finish - post | Gold |
| Contact length - post | 0.125\" (3.18mm) |
| Overall contact length | 0.700\" (17.78mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.405\" (10.29mm) |
| Contact finish thickness - post | Flash |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 87633-4: This 4-position unshrouded header from the AMPMODU Mod I series uses a 0.156" (3.96 mm) pitch — wide enough to route a single trace between pads on a standard 1 oz copper board without necking down.
The through-hole solder termination is straightforward for hand or wave-solder assembly; the 0.405" (10.29 mm) mating length gives the receptacle contact beam enough wipe to establish a low-resistance interface.
Buyers need immediate availability to avoid delays in production or repair.
Engineers need detailed specs to verify fit and electrical compatibility.
Buyers need cost data for budget and BOM pricing.
Compliance is critical for regulatory and environmental requirements.
Maintenance techs need to know if the exact part is available or if a substitute exists.
Design engineers need pin assignments for circuit layout.