Skip to main content
Log in
TE Connectivity AMP Connectors 9-102974-0-10 — Pin Headers, Sockets & Housings

9-102974-0-10 TE AMPMODU Mod II Header, 10-Pos, 2.54mm Pitch

MPN9-102974-0-10
Active

TE Connectivity AMPMODU Mod II header, breakaway, 10 positions, 0.100" (2.54mm) pitch, single row, right-angle through-hole, gold mating finish, 3A rated.

$2.0300Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 9-102974-0-10 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

9-102974-0-10 key specifications
ParameterValue
SeriesAMPMODU Mod II
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.138\" (3.50mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0

All specifications

9-102974-0-10 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions10
Contact finish - postTin
Contact length - post0.110\" (2.79mm)
Contact finish - matingGold
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

Rated 3 A per contact. At this current the temperature rise stays below the thermoplastic housing limit (UL94 V-0 rated), so it's a signal-level interconnect — not for power distribution. Gold mating finish at 15.0µin thickness. The post is tin-plated (100.0µin), which solders cleanly into the through-hole.

How It Compares to 9-102974-0-09

The only difference between 9-102974-0-10 and 9-102974-0-09 is the position count: 10 positions vs 9 positions. Same pitch, same plating, same right-angle orientation. If your BOM calls for 10 circuits, this is the correct member.