TE Connectivity AMPMODU Mod II, Header, Breakaway, 11 Positions, 1 Row, 0.100" (2.54mm) Pitch, Through Hole, Right Angle, Gold Mating Contact, 3A, -65°C ~ 105°C, UL94 V-0
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.138\" (3.50mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 11 |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The post finish is tin, which solders cleanly into the plated through-hole.
Through-hole, right-angle mounting means the pins exit the board parallel to the PCB surface. The post length is 0.110 inches (2.79 mm), which fits a typical 0.062-inch board with enough tail for a good solder fillet.
Buyers need to compare cost and budget for their BOM line.
Sourcing buyers need to find reliable distributor with stock.
Design engineers need pinout and electrical characteristics.
Compliance is critical for regulatory and environmental standards.
Physical fitment in PCB design is essential before purchase.
Techs and buyers look for alternative if part is unavailable or too expensive.