TE Connectivity AMP Connectors AMPMODU Mod II header, breakaway, 38 positions, 0.100" (2.54 mm) pitch, single row, right-angle through-hole, gold mating finish, 3 A, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.138\" (3.50mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 38 |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 9-102974-0-38: This 38-position, single-row header from the AMPMODU Mod II series is an unshrouded breakaway design — you snap individual sections from a longer strip to get exactly the circuit count your BOM calls for.
The mating pin length of 0.318" (8.08 mm) provides adequate wipe for the receptacle contact.
This is a single-row, 38-position header with all positions loaded. The pinout follows the standard AMPMODU Mod II grid: pins are numbered sequentially from 1 to 38 along the row.
It mates with AMPMODU Mod II receptacles and female socket housings that accept 0.025" square posts on 0.100" pitch. Common mates include TE part numbers from the AMPMODU Mod II receptacle series — confirm the specific housing and terminal part numbers for your wire gauge and application.
RoHS compliance is standard for TE Connectivity's AMPMODU Mod II series, but the specific compliance status should be verified against the latest TE compliance documentation for this base product number.