Skip to main content
Log in
TE Connectivity AMP Connectors 9-103326-0-29 — Pin Headers, Sockets & Housings

9-103326-0-29 TE Connectivity AMPMODU Mod II 58-Pin Header

MPN9-103326-0-29
Active

TE Connectivity AMP Connectors AMPMODU Mod II, 58-position dual-row unshrouded header, 0.100" (2.54 mm) pitch, through-hole right-angle, gold mating finish, 3 A per contact, UL94 V-0 black thermoplastic.

$5.4800Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 9-103326-0-29 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

9-103326-0-29 key specifications
ParameterValue
SeriesAMPMODU Mod II
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C ~ 105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.238\" (6.05mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0

All specifications

9-103326-0-29 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions58
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Contact finish - matingGold
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

58-Position Right-Angle Breakaway Header

This 9-103326-0-29 is a 58-position, dual-row unshrouded header from the AMPMODU Mod II series. All 58 positions are loaded, giving you the full pin count for dense signal routing. The post finish is 100 µinch tin for reliable solder wetting.

Footprint and Layout Fit

Insulation height is 0.238" (6.05 mm) above the board surface, which keeps the profile low for tight card cages or mezzanine spacing.

Material and Environment

Contact base is copper alloy with gold on the mating interface and tin on the solder tail — a common pairing that balances signal integrity at the connection with solderability at the board.

Sourced through independent distribution channels; quoted to order against your BOM quantity.

Frequently asked questions

What is the mating connector for 9-103326-0-29?

Typical mates are AMPMODU Mod II receptacles or other 0.100" pitch female connectors with 0.025" square pin receptacles.