Single-position right-angle header for board-edge breakout
The 9-103329-0-01: The single position means this is a breakout or test-point part, not a multi-circuit harness connector. Confirm your BOM really calls for one circuit before committing. The square pin shape mates with standard 0.025-inch square receptacles.
The right-angle orientation means the pin extends 0.230 inches (5.84 mm) from the insulator for mating, and the solder tail is 0.120 inches (3.05 mm) long — enough for a standard through-hole solder joint on a 1.6 mm board. Insulation height is 0.138 inches (3.50 mm) above the board surface. Unshrouded design means no polarisation key or latch — the mating connector must be aligned manually. Not recommended for high-vibration or blind-mate applications without additional mechanical retention.