Skip to main content
Log in
9-103330-0-02 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

9-103330-0-02 TE AMPMODU Mod II Header R/A 4POS 2.54mm

MPN9-103330-0-02
Active

TE Connectivity AMPMODU Mod II, 9-103330-0-02 — 4-position unshrouded breakaway header, 0.100" (2.54mm) pitch, right-angle through-hole, tin-plated square pins, rated 3A per contact, UL94 V-0 black thermoplastic housing.

$0.4600Ref. price · indicative, final on quote
9-103330-0-02 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

9-103330-0-02 Technical Specifications
ParameterValue
SeriesAMPMODU Mod II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.238\" (6.05mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions4
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Right-angle unshrouded header on 0.100-inch grid

Tin plating is suited for occasional mating cycles; the 3 A per-contact rating holds at the listed temperature range without exceeding the housing material limit.

Active production, no second-source on record

For a BOM line that needs a 4-position, 0.100" right-angle header, this order code is the direct fit; no official cross-reference or pin-compatible second-source is published by the manufacturer.

Peer comparison: shrouded alternatives at the same pitch

That part uses a 0.098" (2.50mm) mating pitch and 0.130" (3.30mm) row spacing, so the footprint differs from the 0.100" grid of the 9-103330-0-02. The shrouded wall and locking latch add vibration resistance, but the board layout must match the tighter pitch and wider row spacing.

Mates with any AMPMODU Mod II 0.100" pitch receptacle that accepts a 0.025" square post — typically the 2- or 4-wall shrouded headers or IDC socket strips.

Frequently asked questions

What mates with 9-103330-0-02?

Because the header is unshrouded, the mating half must provide its own polarization or keying to prevent misalignment.