TE Connectivity AMPMODU Mod II, Header, Breakaway, 42 Positions, 0.100" (2.54mm) Pitch, Through Hole, Right Angle, Tin Mating Contact Finish, 3A
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.238\" (6.05mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 42 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.120\" (3.05mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
The 9-103330-0-21: The 0.100" x 0.100" dual-row grid gives you a standard footprint that mates with AMPMODU Mod II receptacles and IDC sockets.
Tin is the cost-optimized choice for equipment that isn't cycled repeatedly or exposed to industrial gases. The 0.230" mating pin length and 0.120" solder tail give enough standoff for standard PCB thicknesses and clearance for the mating receptacle's latch or housing wall.
42 positions, all loaded, in a dual-row 0.100-inch pitch layout.
The unshrouded header allows mating with standard low-profile or latch-equipped housings.