Skip to main content
Log in
TE Connectivity AMP Connectors 9-103759-0-10 — Pin Headers, Sockets & Housings

9-103759-0-10 TE Connectivity AMPMODU Mod II Header, 10 Pos

MPN9-103759-0-10
Active

TE Connectivity AMPMODU Mod II header, breakaway, 10 positions, 0.100" (2.54 mm) pitch, unshrouded, right-angle through-hole, tin-plated contacts, 3 A, UL94 V-0 black thermoplastic housing.

$1.8800Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 9-103759-0-10 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

9-103759-0-10 key specifications
ParameterValue
SeriesAMPMODU Mod II
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.138\" (3.50mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0

All specifications

9-103759-0-10 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions10
Contact finish - postTin
Contact length - post0.090\" (2.29mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The 9-103759-0-10: The right-angle through-hole termination orients the pin parallel to the board, which keeps the mated connector low-profile in a board-edge or mezzanine stack-up. Unshrouded means the header relies on the mating half for alignment — the breakaway design lets you snap individual positions for custom circuit counts.

Board Fit and Routing Considerations

The 0.100" pitch and single-row layout give a 10-position footprint that is 1.00" wide on the board. The post length is 0.090" (2.29 mm), suitable for a 1.6 mm thick PCB with a through-hole solder joint.

Sourcing and Production Status

Sourced through independent distribution channels. No direct stock-holding claim — each RFQ is sourced per order.

Frequently asked questions

What is the current rating of 9-103759-0-10?

Rated 3 A per contact. Derating may apply at the upper end of the temperature range.

Does 9-103759-0-10 have a locking feature?

No. The fastening type is Push-Pull, and the header is unshrouded. There is no integral locking latch or secondary lock — retention relies on the friction fit of the mating receptacle and, if needed, external hardware or a wire-to-board latch on the mating half.