TE Connectivity AMP Connectors AMPMODU Mod II unshrouded breakaway header, 40 positions single row, 0.100" (2.54 mm) pitch, right-angle through-hole, gold mating finish, 3 A per contact, UL94 V-0, RoHS.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.138\" (3.50mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 40 |
| Contact finish - post | Tin |
| Contact length - post | 0.090\" (2.29mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
Current rating is 3 A per contact, which is the thermal ceiling at 25°C ambient — derate above that per the product drawing.
The 0.100" pitch sets the board layout grid — each row of 40 holes on 2.54 mm centers. The post length below the board is 0.090" (2.29 mm), typical for a 1.6 mm PCB with solder fillet.
Sourced through independent distribution against RFQ. The bulk package means it ships in tubes or bags, not tape-and-reel.
Unshrouded — no side walls around the pins. It mates with a standard unshrouded receptacle.
Any 0.100" pitch single-row receptacle, such as TE AMPMODU Mod II socket housings or IDC connectors with the same pitch and pin count.