Skip to main content
Log in
9-103765-0-25 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

9-103765-0-25 TE Connectivity AMPMODU Mod II Header, 25 Pos

MPN9-103765-0-25
Active

TE Connectivity AMPMODU Mod II, Header, Breakaway, 25 Positions, 0.100" (2.54mm) Pitch, Through Hole, Right Angle, Gold Mating Finish, 3A, UL94 V-0

$4.9200Ref. price · indicative, final on quote
9-103765-0-25 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

9-103765-0-25 Technical Specifications
ParameterValue
SeriesAMPMODU Mod II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C ~ 105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.138\" (3.50mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions25
Contact finish - postTin
Contact length - post0.090\" (2.29mm)
Contact finish - matingGold
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Board-to-Board or Cable Interconnect, 25-Way Single Row

The 9-103765-0-25: This 25-position unshrouded breakaway header from the AMPMODU Mod II series mates with matching receptacle connectors for board-to-board or cable-to-board links.

Sizing the Board Footprint and Current Budget

At 0.100" pitch and 25 positions, the single-row layout occupies 2.50" of board edge — the right-angle solder tails (0.090" post length) seat into plated through-holes. Push-pull fastening means no locking latch; in vibration-prone environments, a secondary retention method (wire tie or potting) is worth planning.

Mates with AMPMODU Mod II receptacle housings (e.g., 5-103166 series) that accept 22-30 AWG crimp terminals. The square male pins, 0.025" square, are standard for the series — the matching crimp terminals run on existing AMP applicators. Solder termination to the PCB: the 0.090" post length suits boards up to 0.062" thick with standard through-hole plating.

Frequently asked questions

What is the pitch and position count of 9-103765-0-25?

0.100" (2.54mm) pitch, 25 positions, single row, all positions loaded.

Is 9-103765-0-25 a right-angle header?

Yes — through-hole, right-angle orientation. The header sits parallel to the PCB, keeping the mated connector low in the enclosure.

Does 9-103765-0-25 have a locking feature?

No. The fastening type is push-pull — no latch. For vibration-prone assemblies, plan a secondary retention method such as a wire tie or potting.

What is the closest pin-compatible alternative to 9-103765-0-25?

No official pin-compatible successor is listed. The AMPMODU Mod II series remains active; other 0.100" pitch unshrouded headers from the same series (e.g., 9-103765-0-xx variants) share the same footprint but differ in position count.