The through-hole termination with 0.125" (3.18 mm) post length suits wave-solder assembly on standard 1.6 mm thick PCBs.
Gold Mating Finish and 3 A Current Rating
The mating contacts are gold-plated at 15.0 µinch (0.38 µm) over nickel — this is the standard thickness for moderate-cycle applications (500 cycles typical) and resists corrosion in humid or mildly corrosive environments.
UL94 V-0 LCP Housing and Push-Pull Retention
The housing is molded from Liquid Crystal Polymer (LCP) rated UL94 V-0 — the highest vertical burn rating for connectors inside equipment enclosures. LCP also offers low moisture absorption and dimensional stability through reflow or wave-solder profiles. Fastening is push-pull — no locking latch. In a vibration environment, the mating receptacle should have a friction lock or be secured via wire-tie or potting if the assembly sees shock.