TE Connectivity AMPMODU Mod II, Header, Breakaway, 28 Positions, 2.54mm Pitch, Through Hole, Unshrouded, Gold Mating Finish, 3A, UL94 V-0
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Liquid Crystal Polymer (LCP) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 28 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.440\" (11.18mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 9-146256-0-14: This is a 28-position, dual-row unshrouded header from TE's AMPMODU Mod II series. The tin-plated solder tails (100 µinch) wet well during wave soldering. That temperature range covers most industrial and telecom environments inside an enclosure.
Common mates include AMPMODU Mod II female sockets and IDC ribbon connectors.
We source this active part through independent distribution. No stock-holding claim is made here.
The mating pitch is 0.100 inch (2.54mm) for both rows, with the same row spacing. This is the standard 0.100-inch grid used across the AMPMODU Mod II family.
It is an unshrouded header — no plastic shroud around the pins. That means it mates with standard receptacles but offers no keying or polarization.