Board Fit and BOM Match for the 6-Position Header
The 9-146258-0-03: Tin is a workhorse finish for moderate-cycle applications — the 100.0 µinch (2.54 µm) thickness on the mating face is thicker than typical flash tin, which helps resist fretting corrosion in environments with mild vibration or thermal cycling.
Unshrouded push-pull header — mates with standard AMPMODU Mod II receptacles or any 0.100" pitch female socket strip. The 0.090" (2.29 mm) post length suits a standard 1/16" board thickness with the solder fillet visible on the bottom side. No press-fit or surface-mount reflow — the board is wave-soldered or hand-soldered after insertion.