TE Connectivity AMPMODU Mod II, Header, Breakaway, 12 Positions, 0.100" (2.54mm) Pitch, Unshrouded, Through Hole, Gold Mating Finish, Bulk
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Liquid Crystal Polymer (LCP) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 12 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.090\" (2.29mm) |
| Overall contact length | 0.410\" (10.41mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 9-146261-0-06: The unshrouded, push-pull fastening design means the header can be snapped to length for custom circuit counts, but the pins remain exposed after mating — plan for clearance around the board edge or use a shrouded receptacle for added protection.
Supplied by TE Connectivity AMP Connectors in bulk packaging.
Unshrouded. The header has no surrounding shroud, so the male pins are exposed after mating. This allows breakaway snap-to-length capability but means the pins are not protected from accidental contact or bending — a shrouded receptacle is recommended for the mating half if physical protection is needed.
This is the standard AMPMODU Mod II footprint, compatible with a wide range of TE receptacles and IDC connectors.