TE Connectivity AMPMODU Mod II header, 9-146261-0-13, 26 positions, dual row, 0.100" (2.54 mm) pitch, unshrouded, male pin, through-hole solder, gold mating finish, 3 A, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Liquid Crystal Polymer (LCP) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 26 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.090\" (2.29mm) |
| Overall contact length | 0.410\" (10.41mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 9-146261-0-13: The unshrouded design keeps the insulation height at 0.090" (2.29 mm), which gives a low profile for board-to-board stacking where z-height is tight.
That part is better suited for cable-to-board applications where polarisation and contact protection matter, but it carries only 4 positions and a different row spacing of 0.130" (3.30 mm). For a 26-position unshrouded board-to-board or cable application, 9-146261-0-13 is the direct fit.
It is an unshrouded header. That means the pins are exposed above the insulator — no side walls for polarisation or contact protection. Use it where board-to-board stacking height is the priority and the mating receptacle provides its own alignment.
The mating pitch is 0.100" (2.54 mm) in both rows, with the same 0.100" row spacing. This is the standard 0.100-inch grid used by most AMPMODU Mod II receptacles.