Skip to main content
Log in
9-146276-0-16 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

9-146276-0-16 TE Connectivity AMPMODU Mod II Header, 16 Pos

MPN9-146276-0-16
Active

TE Connectivity AMPMODU Mod II unshrouded breakaway header, 16 positions, single row, 0.100" (2.54mm) pitch, through-hole solder termination, gold-plated mating contacts, black LCP housing, UL94 V-0.

$2.1200Ref. price · indicative, final on quote
9-146276-0-16 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

9-146276-0-16 Technical Specifications
ParameterValue
SeriesAMPMODU Mod II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.090\" (2.29mm)
Insulation materialLiquid Crystal Polymer (LCP)
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions16
Contact finish - postTin
Contact length - post0.125\" (3.18mm)
Overall contact length0.533\" (13.55mm)
Contact finish - matingGold
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

16-Position Breakaway Header at 0.100" Pitch

The 9-146276-0-16: This is a 16-position, single-row unshrouded header from the AMPMODU Mod II series. The breakaway design lets you snap the strip to a shorter length if the full 16 circuits aren't needed — one family, fewer SKUs on the BOM.

Gold Mating Finish for Repeated Connect Cycles

The mating contact finish is gold over nickel at 15.0 µinch (0.38 µm) — a standard thickness for moderate-cycle applications. In a bench-test or field-service environment where the connector is mated and unmated a few dozen times over the product life, this plating resists fretting corrosion and keeps contact resistance stable. The post (solder tail) finish is tin at 100.0 µinch (2.54 µm), which wets well during wave soldering.

It is RoHS compliant.

Frequently asked questions

Can I replace 9-146276-0-16 with a similar TE header?

This is a standard 0.100" pitch breakaway header — many TE AMPMODU Mod II headers share the same footprint. Confirm the mating contact finish (gold vs tin) and overall contact length to match your application.