TE Connectivity AMP Connectors AMPMODU Mod II, Header, Breakaway, 3 Positions, 0.100" (2.54mm) Pitch, Through Hole, Solder, Gold Mating, Tin Post, Black LCP Housing, UL94 V-0, Active
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Liquid Crystal Polymer (LCP) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 3 |
| Contact finish - post | Tin |
| Contact length - post | 0.125\" (3.18mm) |
| Overall contact length | 0.533\" (13.55mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The mating pin extends 0.318" (8.08mm) above the insulator — enough to engage standard receptacle contacts without bottoming out. The push-pull retention relies on the contact friction fit — no locking latch, so the assembly is best suited for low-vibration environments or where the cable is strain-relieved separately.
Supplied in bulk packaging. No stock-holding claim — sourced through independent distribution channels.
The pitch is 0.100" (2.54mm) and it has 3 positions in a single row. All positions are loaded.
Unshrouded — the male pins are exposed above the insulator. This mates with standard unshrouded receptacles and allows side-entry cable routing.