Skip to main content
Log in
9-146278-0-03 — TE Connectivity AMP Connectors product photo
TE Connectivity AMP Connectors

TE Connectivity 9-146278-0-03 Header

MPN9-146278-0-03
Active

TE Connectivity AMPMODU Mod II, Header, Breakaway, 3 Positions, 0.100" (2.54 mm) Pitch, Unshrouded, Tin Mating Finish, 3 A, Through Hole, Solder Termination

$0.3600Ref. price · indicative, final on quote
9-146278-0-03 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

9-146278-0-03 Technical Specifications
ParameterValue
SeriesAMPMODU Mod II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader, Breakaway
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.090\" (2.29mm)
Insulation materialLiquid Crystal Polymer (LCP)
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions3
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Overall contact length0.440\" (11.18mm)
Contact finish - matingTin
Contact length - mating0.230\" (5.84mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Active Sourcing for a Standard 3-Pin Header

Board Fit and Routing: 2.54 mm Pitch, Unshrouded

Current and Thermal: 3 A per Contact, Tin Finish

For repeated mating beyond a few hundred cycles, a gold-plated sibling would be a better choice — but for a fixed harness or low-cycle board interconnect, this tin finish holds up fine.

How This Unshrouded Header Differs from a Shrouded Sibling

The 9-146278-0-03 is unshrouded, single-row, 0.100" pitch, and uses a simple push-pull fastening. If your application needs polarization and a locking latch, the shrouded sibling is the correct choice; for a bare pin header that mates with a standard receptacle, this unshrouded part is the direct fit.

Frequently asked questions

What is the pitch of 9-146278-0-03?

The mating pitch is 0.100" (2.54 mm), a standard grid for through-hole PCB layouts.

Can 9-146278-0-03 be used for wire-to-board connections?

Yes — the style is listed as Board to Board or Cable, so it can mate with a wire-to-board receptacle that accepts the 0.100" pitch pin pattern.